The duration of air travel between Milwaukee, Wisconsin, and Punta Cana, Dominican Republic, is a key factor for travelers planning vacations or business trips. This involves considering not only the scheduled flight duration but also potential layovers, which can significantly impact total travel time. For example, a direct flight might take approximately four hours, while connecting flights could extend the journey to six or more hours depending on the layover duration and location.
Understanding the typical range of travel durations allows for effective trip planning, including scheduling ground transportation, booking accommodations, and managing overall vacation time. Historically, the availability of direct flights and the efficiency of connecting flight routes have evolved, influencing overall travel times between these two destinations. Access to this information empowers travelers to make informed decisions, optimizing their itineraries for a smoother and more enjoyable experience.
This article will delve into the various factors impacting the overall travel duration between Milwaukee and Punta Cana, exploring direct and connecting flight options, seasonal variations, airline choices, and tips for minimizing travel time. Furthermore, the discussion will extend to considerations beyond the flight itself, such as airport transfer times and customs procedures, to provide a comprehensive understanding of the complete travel experience.
1. Direct Flights
Direct flights represent a significant factor influencing overall travel time between Milwaukee and Punta Cana. Eliminating the need to change planes and endure layovers significantly reduces the total duration of the journey. While a direct flight might typically range from 3.5 to 4.5 hours, depending on aircraft and wind conditions, connecting flights can add several hours to the overall travel time. This difference can be crucial for travelers with limited vacation time or those prioritizing a swift arrival.
The availability of direct flights often fluctuates based on seasonal demand and airline scheduling. During peak tourist seasons, direct flights are more common, reflecting higher traveler volume. However, during the off-season, direct flights may be less frequent, potentially necessitating connecting flights through hubs like Charlotte, Atlanta, or Miami. Understanding these seasonal variations allows travelers to anticipate potential travel time fluctuations and adjust their plans accordingly. For instance, a family traveling during the summer months might benefit from the convenience and speed of a direct flight, while a business traveler during the shoulder season might need to factor in additional layover time.
The strategic choice of direct flights, when available, demonstrably optimizes travel time between Milwaukee and Punta Cana. This efficiency translates to more time spent enjoying the destination and less time in transit. However, travelers must consider the trade-offs between direct flight availability, cost, and overall travel flexibility when making their final booking decisions. Careful consideration of these elements contributes to a more informed and satisfying travel experience.
2. Connecting Flights
Connecting flights play a significant role in determining overall travel time between Milwaukee and Punta Cana, particularly when direct flights are unavailable or less desirable due to cost or scheduling constraints. Understanding the nuances of connecting flights is crucial for managing expectations and planning accordingly.
-
Layover Locations and Durations
The choice of connecting airport and the layover duration significantly impact the overall travel time. A short layover in a smaller airport might offer a quicker transfer, while a longer layover in a larger hub could provide opportunities for dining or exploring airport amenities. For example, connecting through Charlotte might offer a shorter layover than connecting through Miami, but the overall travel time could vary depending on flight schedules and potential delays.
-
Airline Alliances and Interline Agreements
Connecting flights often involve multiple airlines, particularly when booking through online travel agencies. Understanding airline alliances and interline agreements becomes essential for ensuring seamless baggage transfer and minimizing potential disruptions. If the chosen airlines lack an agreement, passengers might need to claim and re-check their baggage, adding considerable time to the layover.
-
Potential for Delays and Missed Connections
Connecting flights introduce a higher risk of delays impacting the overall travel time. A delayed initial flight can lead to a missed connection, requiring passengers to be rebooked on a later flight, potentially adding several hours or even an overnight stay to the journey. Considering potential delays is crucial when choosing connecting flights, especially for time-sensitive travel.
-
Cost Considerations and Travel Flexibility
Connecting flights sometimes offer cost savings compared to direct flights, but this often comes at the expense of increased travel time. Travelers must weigh the trade-offs between cost and convenience when selecting connecting flights. Additionally, connecting flights can offer greater flexibility in terms of departure times and potential travel dates, which might be advantageous for travelers with less rigid schedules.
Careful consideration of these factors allows travelers to make informed decisions when choosing connecting flights between Milwaukee and Punta Cana. Balancing the potential cost savings with the increased travel time and inherent risks of delays is essential for a smooth and predictable travel experience. By understanding the complexities of connecting flights, travelers can mitigate potential disruptions and optimize their overall journey.
3. Layover Durations
Layover durations constitute a critical component of overall Milwaukee to Punta Cana flight time, particularly when connecting flights are involved. The duration of a layover directly impacts the total travel time, influencing scheduling decisions and potentially affecting passenger experience. A shorter layover, for example, minimizes time spent in transit but increases the risk of missed connections due to unforeseen delays. Conversely, a longer layover provides a buffer against delays but adds to the overall journey duration. Consider a scenario where a traveler connects through Atlanta. A one-hour layover might appear efficient, but a minor delay in the incoming flight could lead to a missed connection and a significantly extended travel time. Conversely, a four-hour layover offers more flexibility but adds several hours to the total journey.
The strategic selection of layover durations requires careful consideration of various factors. These include the size and layout of the connecting airport, the potential for delays based on historical data and current conditions, and the traveler’s personal comfort level with tight connections. In larger airports like Atlanta Hartsfield-Jackson, navigating between terminals can consume considerable time, necessitating a longer layover. Smaller airports, like Charlotte Douglas, might allow for shorter layovers due to more efficient terminal layouts. Furthermore, analyzing historical flight data for on-time performance can inform decisions regarding layover durations. Routes with a higher incidence of delays warrant longer layovers to mitigate the risk of missed connections.
Optimizing layover durations requires balancing efficiency with risk mitigation. While minimizing layover time reduces overall travel duration, it introduces vulnerability to delays. Conversely, longer layovers enhance flexibility and reduce stress but increase total travel time. Ultimately, the ideal layover duration depends on individual circumstances, travel preferences, and a realistic assessment of potential delays. Understanding the impact of layover durations on overall Milwaukee to Punta Cana flight time empowers travelers to make informed decisions, balancing the desire for a swift journey with the need for a predictable and manageable travel experience.
4. Seasonal Variations
Seasonal variations exert a considerable influence on Milwaukee to Punta Cana flight time, impacting both flight availability and duration. Peak travel seasons, typically coinciding with holidays and school breaks, experience a surge in demand, leading to increased flight frequency and often shorter travel times due to the availability of more direct flights. Conversely, during the off-season or shoulder seasons, demand decreases, resulting in fewer direct flights and potentially longer overall travel times due to the necessity of connecting flights. This fluctuation in flight options necessitates careful consideration of travel dates when planning a trip. For instance, traveling during the peak holiday season might offer more direct flight options, reducing overall travel time, but may also come with higher airfares. Traveling during the less popular months might offer lower fares but potentially necessitate connecting flights through hubs like Miami or Charlotte, increasing total travel time.
Beyond flight availability, seasonal variations can also affect flight durations themselves. Weather patterns, such as hurricane season in the Caribbean, can influence flight routes and air traffic control decisions, potentially leading to longer flight times or even cancellations. Furthermore, seasonal winds can impact flight speeds, subtly influencing travel duration. Understanding these seasonal factors is crucial for managing expectations and planning accordingly. A traveler planning a trip during hurricane season, for example, should anticipate potential disruptions and consider travel insurance to mitigate the risk of delays or cancellations. Similarly, understanding the potential impact of seasonal winds on flight duration allows travelers to factor in potential time variations when planning connecting flights or ground transportation upon arrival.
In summary, seasonal variations represent a crucial consideration when evaluating Milwaukee to Punta Cana flight time. The interplay between seasonal demand, weather patterns, and airline scheduling directly impacts both flight availability and duration. Careful consideration of these seasonal factors, combined with diligent research of flight options and potential disruptions, empowers travelers to make informed decisions, optimize travel itineraries, and manage expectations for a smoother and more predictable travel experience. This understanding translates to a more enjoyable and stress-free journey, regardless of the chosen travel season.
5. Airline Choices
Airline choices significantly influence Milwaukee to Punta Cana flight time, impacting not only the duration but also the overall travel experience. Different airlines offer varying routes, aircraft types, and schedules, which directly affect the total time spent in transit. Careful consideration of airline options is essential for optimizing travel itineraries and managing expectations.
-
Direct vs. Connecting Flights
The choice between direct and connecting flights represents a fundamental decision impacting overall travel time. Airlines offering direct flights between Milwaukee and Punta Cana provide the fastest travel option, typically ranging from 3.5 to 4.5 hours. Conversely, airlines offering only connecting flights necessitate layovers, potentially adding several hours to the total journey. For example, Frontier Airlines might offer a direct flight, while other airlines may route passengers through hubs like Atlanta or Charlotte, increasing overall travel time.
-
Layover Options and Airport Hubs
Airlines utilize different hub airports for connecting flights, influencing layover durations and overall travel time. An airline connecting through a smaller airport like Charlotte might offer a shorter layover than one connecting through a larger, busier hub like Atlanta. Understanding an airline’s hub network allows travelers to anticipate potential layover durations and choose accordingly. This factor becomes particularly relevant when evaluating time-sensitive travel or considering the potential impact of delays.
-
Aircraft Type and Speed
Aircraft type influences both flight duration and passenger comfort. Some airlines might utilize newer, faster aircraft on the Milwaukee to Punta Cana route, subtly reducing flight time compared to airlines using older or smaller aircraft. While the difference might be marginal, it can be a factor for travelers prioritizing speed or seeking specific in-flight amenities. Furthermore, aircraft type influences factors like legroom and seat configuration, impacting the overall comfort of the journey.
-
Scheduling and Frequency
Airline schedules and flight frequencies impact travel flexibility and potentially overall travel time. Airlines offering multiple daily flights provide more options for departure and arrival times, allowing travelers to optimize their itineraries. Conversely, airlines with limited flight frequency might necessitate less desirable departure times or longer layovers, impacting overall travel duration and potentially requiring additional overnight stays. For example, an airline offering only one daily flight might require a longer layover compared to an airline with multiple daily departures.
Strategic airline selection requires careful consideration of these factors in relation to individual travel needs and priorities. Balancing the desire for a swift journey with cost considerations, schedule flexibility, and potential layover durations empowers travelers to make informed decisions and optimize their Milwaukee to Punta Cana flight time. This proactive approach contributes to a smoother, more predictable, and ultimately more satisfying travel experience.
6. Airport Transfers
Airport transfers represent a crucial component of overall Milwaukee to Punta Cana travel time, extending beyond the flight itself. Efficiently navigating ground transportation at both departure and arrival airports is essential for minimizing overall travel duration and ensuring a smooth, predictable travel experience. Overlooking the time required for airport transfers can lead to missed flights, extended layovers, and unnecessary stress.
-
Milwaukee Departure: Ground Transportation and Check-in Procedures
The time required to reach Milwaukee Mitchell International Airport (MKE) depends on the chosen mode of transport. Driving and parking typically require additional time for parking procedures, while ride-sharing services offer more direct curbside drop-off but can be subject to traffic delays. Furthermore, factoring in sufficient time for check-in, security screening, and navigating to the departure gate is crucial, particularly during peak travel periods. Underestimating these factors can lead to missed flights and significant disruptions to travel plans.
-
Punta Cana Arrival: Immigration, Baggage Claim, and Ground Transportation
Upon arrival at Punta Cana International Airport (PUJ), travelers must navigate immigration and customs procedures, which can add considerable time depending on passenger volume and processing efficiency. Retrieving checked baggage and proceeding through customs can further extend the overall airport transfer time. Finally, securing ground transportation to the final destination, whether through pre-arranged transfers, taxis, or rental cars, constitutes the final stage of the airport transfer process. Delays at any of these stages can impact overall travel time and necessitate adjustments to post-arrival schedules.
-
Pre-Arranged Transfers vs. On-Arrival Options
Pre-booking airport transfers, such as shuttle services or private transportation, can expedite the process upon arrival in Punta Cana. This eliminates the need to negotiate fares or wait in queues for taxis or ride-sharing services. However, pre-arranged transfers offer less flexibility in case of flight delays. On-arrival transportation options provide more adaptability but might involve longer wait times and potentially higher costs. The choice between these options depends on individual travel preferences, budget considerations, and risk tolerance for potential delays.
-
Impact on Connecting Flights
For travelers with connecting flights, efficient airport transfers become paramount. Insufficient time allocated for transfers at the connecting airport can lead to missed connections and significant delays. When booking connecting flights, carefully consider the minimum connection time recommended by the airline and factor in potential delays related to ground transportation, security screenings, and navigating between terminals. Underestimating these factors can jeopardize the entire travel itinerary.
Integrating airport transfer time into overall Milwaukee to Punta Cana flight time calculations provides a more accurate and realistic understanding of the total travel duration. Efficiently navigating ground transportation at both departure and arrival airports minimizes overall travel time, reduces stress, and enhances the overall travel experience. This holistic approach to travel planning ensures a smoother, more predictable journey, allowing travelers to focus on enjoying their time in Punta Cana rather than navigating logistical challenges.
7. Customs Procedures
Customs procedures represent an integral component of Milwaukee to Punta Cana flight time, impacting the overall duration of the travel experience. While often overlooked in initial flight time calculations, the time required to navigate customs and immigration procedures upon arrival in Punta Cana can significantly influence the total time spent in transit. This factor becomes particularly relevant for travelers with tight connecting flights or time-sensitive itineraries. For example, a delayed flight combined with lengthy customs processing could lead to a missed connection or necessitate significant adjustments to post-arrival plans. Understanding the potential impact of customs procedures allows travelers to allocate sufficient buffer time and mitigate the risk of delays.
Several variables influence customs processing times, including passenger volume, staffing levels at the Punta Cana International Airport (PUJ), and the efficiency of individual processing. Peak travel seasons often experience higher passenger volumes, potentially leading to longer wait times in customs queues. Unforeseen circumstances, such as equipment malfunctions or enhanced security screenings, can further exacerbate processing times. Travelers should anticipate these potential delays and factor them into overall travel time calculations. Practical measures, such as utilizing expedited customs programs like Global Entry or completing required customs declarations in advance, can help streamline the process and minimize potential wait times. Furthermore, staying informed about current travel advisories and airport conditions can provide valuable insights into potential delays and facilitate proactive planning.
Efficiently navigating customs procedures requires proactive planning and a realistic understanding of potential delays. Integrating customs processing time into overall Milwaukee to Punta Cana flight time estimations provides a more accurate and comprehensive perspective on the total travel duration. This proactive approach allows travelers to manage expectations, minimize the impact of potential delays, and ensure a smoother, more predictable travel experience. By acknowledging the integral role of customs procedures within the broader context of travel time, travelers can optimize their itineraries and focus on enjoying their time in Punta Cana rather than navigating logistical complexities.
8. Total Travel Time
Total travel time encompasses more than just the Milwaukee to Punta Cana flight time; it represents the complete duration of the journey, from leaving one’s residence in Milwaukee to arriving at the final destination in Punta Cana. Accurately estimating total travel time is crucial for effective trip planning, allowing travelers to manage expectations, schedule activities, and minimize potential disruptions.
-
Pre-Departure Preparations
Pre-departure preparations, including packing, arranging transportation to the airport, and accounting for potential traffic delays, contribute to the overall travel time. For example, allocating insufficient time for these activities could lead to a missed flight, significantly impacting the total travel duration. Realistically estimating pre-departure time is essential for a smooth start to the journey.
-
Airport Procedures
Airport procedures, such as check-in, security screenings, and navigating to the departure gate, constitute a substantial portion of total travel time. These processes can vary in duration depending on factors like airport size, passenger volume, and security protocols. For instance, navigating a larger airport like Hartsfield-Jackson Atlanta International Airport during peak season might require significantly more time than a smaller airport like Milwaukee Mitchell International Airport. Accurately accounting for airport procedures is essential for realistic travel time estimations.
-
Flight Duration and Potential Layovers
The Milwaukee to Punta Cana flight time itself, including potential layovers for connecting flights, forms the core component of total travel time. Direct flights typically offer the shortest travel time, while connecting flights introduce additional time for layovers, plane changes, and potential delays. Considering both scheduled flight duration and potential layover time provides a more accurate understanding of the overall air travel component.
-
Post-Arrival Procedures and Ground Transportation
Post-arrival procedures, including immigration, customs, baggage claim, and ground transportation to the final destination, contribute significantly to total travel time. Navigating these processes can be time-consuming, particularly in busy airports or during peak travel seasons. Furthermore, the chosen mode of ground transportation, such as taxis, shuttles, or rental cars, influences the time required to reach the final destination in Punta Cana. Factoring in these post-arrival procedures is crucial for comprehensive travel time planning.
Accurately assessing total travel time requires considering all these components in relation to the specific Milwaukee to Punta Cana flight itinerary. A comprehensive understanding of each element’s potential impact allows travelers to develop realistic expectations, minimize potential disruptions, and ultimately optimize their travel experience. By acknowledging the interconnectedness of these factors, travelers can plan more effectively and ensure a smoother, more predictable journey from Milwaukee to Punta Cana.
9. Time Zone Difference
The time zone difference between Milwaukee and Punta Cana plays a crucial role in accurately calculating total travel time and managing post-arrival schedules. While the flight duration itself remains constant, the shift in time zones impacts arrival times and requires careful consideration when planning activities, booking accommodations, and scheduling ground transportation.
-
Standard Time vs. Daylight Saving Time
During standard time, Punta Cana is one hour ahead of Milwaukee. This means a flight departing Milwaukee at 10:00 AM Central Standard Time (CST) would arrive in Punta Cana at 2:00 PM Atlantic Standard Time (AST), assuming a four-hour flight duration. However, during daylight saving time, when both locations observe daylight saving, the time difference becomes negligible. A flight departing Milwaukee at 10:00 AM Central Daylight Time (CDT) would arrive in Punta Cana at 11:00 AM Atlantic Daylight Time (ADT), again assuming a four-hour flight. Understanding this seasonal shift is critical for accurate scheduling.
-
Impact on Arrival Time and Activities
The time zone difference directly influences the effective arrival time in Punta Cana and the available time for activities on the arrival day. Arriving later in the day due to the time change might limit opportunities for certain activities, such as excursions or check-in times at some accommodations. Considering the time zone difference allows travelers to adjust their plans accordingly and maximize their time in Punta Cana. For example, scheduling a late afternoon arrival during standard time might necessitate postponing planned activities to the following day.
-
Adjusting to Local Time
The time zone difference can contribute to jet lag, particularly for travelers unaccustomed to such shifts. Adjusting to the local time in Punta Cana is essential for maximizing enjoyment and minimizing the impact of fatigue. Strategies for mitigating jet lag include staying hydrated during the flight, adjusting sleep schedules in advance of the trip, and exposing oneself to natural light upon arrival. Understanding the time zone difference and its potential impact on the body allows travelers to prepare accordingly.
-
Communication and Coordination
The time zone difference necessitates careful consideration when communicating with individuals or businesses in both Milwaukee and Punta Cana. Scheduling calls, confirming reservations, or coordinating ground transportation requires accounting for the time difference to avoid miscommunication or scheduling conflicts. For example, confirming a pick-up time with a transportation service in Punta Cana requires converting the time to the appropriate time zone to ensure accurate coordination.
Accurately accounting for the time zone difference between Milwaukee and Punta Cana is essential for effective trip planning and a smooth travel experience. Integrating this factor into overall travel time calculations and post-arrival scheduling ensures realistic expectations, minimizes potential disruptions, and allows travelers to maximize their time and enjoyment in Punta Cana.
Frequently Asked Questions
This section addresses common inquiries regarding Milwaukee to Punta Cana flight time, providing concise and informative responses to facilitate informed travel planning.
Question 1: What is the average Milwaukee to Punta Cana flight time for a direct flight?
Direct flights typically range from 3.5 to 4.5 hours, depending on aircraft type and wind conditions.
Question 2: How does the time of year influence flight duration and availability?
Peak seasons often see more direct flights and potentially shorter travel times due to increased demand. Off-peak seasons might require connecting flights, increasing overall travel duration.
Question 3: How do connecting flights impact overall travel time?
Connecting flights add time due to layovers, which can range from one hour to several hours depending on the connecting airport and flight schedules. Potential delays also pose a greater risk with connecting flights.
Question 4: Which airlines commonly offer flights between Milwaukee and Punta Cana?
Several airlines, including Frontier, Southwest, Delta, and American, often offer flights, either direct or connecting, between Milwaukee and Punta Cana. Availability and specific routes vary depending on the time of year.
Question 5: How does the time zone difference affect travel planning?
Punta Cana is one hour ahead of Milwaukee during standard time and observes the same time as Milwaukee during daylight saving time. This necessitates careful scheduling of post-arrival activities and consideration of potential jet lag.
Question 6: Beyond flight time, what other factors influence total travel duration?
Ground transportation to and from airports, airport procedures (check-in, security), customs and immigration processing, and baggage claim all contribute to overall travel time. These factors should be considered in conjunction with flight duration for comprehensive planning.
Careful consideration of these frequently asked questions empowers travelers to make informed decisions, manage expectations, and plan a smoother journey.
For further insights and detailed information regarding specific flight options and travel planning resources, consult the following sections.
Tips for Optimizing Milwaukee to Punta Cana Travel Time
Minimizing travel time and maximizing vacation enjoyment requires strategic planning. The following tips offer valuable guidance for optimizing travel between Milwaukee and Punta Cana.
Tip 1: Book Flights in Advance
Booking flights well in advance allows travelers to secure preferred itineraries, including direct flights or connecting flights with desirable layover durations. Advanced booking also often yields better fares, particularly during peak seasons. Booking several months prior to the intended travel dates offers optimal flexibility and cost-effectiveness.
Tip 2: Consider Off-Peak Travel
Traveling during shoulder seasons (spring or fall) often leads to lower airfares and potentially shorter lines at airports and customs. While direct flight availability might decrease during these periods, the potential cost savings and reduced crowds can compensate for slightly longer travel times.
Tip 3: Utilize Flight Comparison Websites
Employing flight comparison websites facilitates comprehensive analysis of various flight options, considering factors like layover durations, airlines, baggage fees, and overall cost. These tools enable informed decision-making, balancing cost, convenience, and total travel duration.
Tip 4: Streamline Airport Procedures
Checking in online, utilizing mobile boarding passes, and adhering to baggage restrictions expedite airport processes, minimizing potential delays. Familiarizing oneself with security procedures in advance further streamlines the process. These proactive measures optimize time spent at both departure and arrival airports.
Tip 5: Pre-Arrange Ground Transportation
Pre-booking airport transfers in Punta Cana eliminates the need to negotiate fares or wait in queues upon arrival. This preemptive measure ensures a seamless transition from airport to final destination, optimizing overall travel time and minimizing post-arrival stress.
Tip 6: Factor in Customs and Immigration Procedures
Realistically accounting for customs and immigration processing time upon arrival in Punta Cana ensures accurate estimation of total travel duration. Understanding potential delays related to these procedures allows for proactive planning and schedule adjustments as necessary.
Tip 7: Prepare for Time Zone Adjustment
Understanding the time zone difference between Milwaukee and Punta Cana, and its seasonal variations, facilitates accurate scheduling of post-arrival activities and minimizes the impact of jet lag. Adjusting sleep schedules in advance and staying hydrated during the flight can further mitigate jet lag effects.
Implementing these strategies optimizes travel time between Milwaukee and Punta Cana, allowing travelers to maximize their vacation experience and minimize potential stress related to transit. These practical tips contribute to a smoother, more efficient, and ultimately more enjoyable journey.
This compilation of travel optimization tips provides valuable insights for planning a seamless journey between Milwaukee and Punta Cana. The following concluding section summarizes key takeaways and offers final recommendations.
Conclusion
This exploration of Milwaukee to Punta Cana flight time has highlighted the multifaceted nature of travel duration. Factors influencing overall travel time extend beyond scheduled flight durations, encompassing considerations such as connecting flights, layover durations, seasonal variations, airline choices, airport transfers, customs procedures, and the time zone difference. A comprehensive understanding of these elements is crucial for effective trip planning and a smooth travel experience. Direct flights offer the quickest option, but connecting flights often provide cost savings and schedule flexibility. Seasonal variations impact both flight availability and duration, necessitating careful consideration of travel dates. Airline choices influence not only flight duration but also layover options and overall travel experience. Efficient airport transfers are essential for minimizing overall travel time, particularly for connecting flights. Navigating customs procedures efficiently requires understanding potential delays and utilizing available resources for expedited processing. Finally, accounting for the time zone difference ensures accurate scheduling and facilitates adjustment to local time upon arrival in Punta Cana.
Optimizing Milwaukee to Punta Cana flight time requires proactive planning, informed decision-making, and a realistic assessment of potential delays. Strategic utilization of travel resources, such as flight comparison websites and pre-arranged ground transportation, contributes to a smoother and more predictable travel experience. Ultimately, a comprehensive understanding of the factors influencing travel duration empowers travelers to make informed choices, minimize potential disruptions, and maximize their time and enjoyment in Punta Cana.
